Standards - ISO Standards
|
The following
is a list of ISO standards relevant to the manufacture and supply of wooden
packaging. |
|
|
ISO Standards:
Published |
ISO 445 |
Pallets for materials
handling - Vocabulary |
Note: This standard is
being reviewed and updated
|
|
ISO 509 |
Pallet trucks - Principle
dimensions |
|
ISO 668 |
Series 1 freight containers -
classification, dimensions and ratings |
|
ISO 3130 |
Wood - Determination of
moisture content for physical and mechanical tests |
|
ISO 3131 |
Wood - Determination of
density for physical and mechanical tests |
|
ISO 3133 |
Wood - Determination of
ultimate strength in static bending |
|
ISO 3394 |
Dimensions of rigid
rectangular packages - Transport packages |
|
ISO 3676 |
Packaging unit load sizes -
Dimensions |
|
ISO/TR 11444 |
Quality of sawn wood used for
the construction of pallets |
|
ISO/TR 12776 |
Pallets - Slip sheets |
|
ISO 12777-1 |
Methods of test for pallet
joints - Part 1: Determination of bending resistance of pallet nails,
other dowel-type fasteners and staples |
|
ISO 12777-2 |
Methods of test for pallet
joints - Part 2: Determination of withdrawal and head pull-through
resistance of pallet nails and staples |
|
ISO 12777-3 |
Methods of test for pallet
joints - Part 3: Determination of strength of pallet joints |
|
ISO 15629 |
Pallets for material handling
- Quality of fasteners for assembly of new and repair of used , flat wooden pallets |
|
ISO 18333 |
Pallets for material handling
- Quality of new wooden components for flat pallets |
|
ISO 18334 |
Pallets for material handling
- Quality of assembly of new, wooden, flat pallets |
|
ISO 18613 |
Repair of flat wooden pallets |
|
|
ISO Standards:
Work in progress |
ISO/FDIS 6780 |
Flat pallets for materials
handling - Principal dimensions and tolerances |
Status: Submitted for final vote
2003 in parallel with CEN vote.
|
ISO/FDIS 8611-1 |
Pallets for material handling
- Part 1: test methods for flat pallets |
Status: This
is being voted as a revised standard in 2003 and will replace the
existing one.
|
ISO/FDIS 8611-2 |
Pallets for material handling
- Part 2: Performance requirements and nominal load |
Status:
Will replace
ISO/TR 10232 (cor 1 1992) and will be published as a TR, when testing
results are available for consideration and decision
|
ISO/FDIS 8611-3 |
Pallets for material handling
- Part 3: Maximum working load |
Status: Will
replace ISO/TR 10233 and will be published as a TR, when
testing results are available for consideration and decision
|
|
|
|
Further
Information on Standards is available from: |
American
National Standards Institute |
British
Standards Institiute |
Deutsches
Institut für Normung e.V |
International
Organization for Standardization |